The Poor Investor – Investigatory Value Investing

"Faber est suae quisque fortunae" -Appius Claudius Caecus

Natcore’s Latest PR- Black Silicon to Slash Solar Cell Production Costs by 23.5%

Reprint of Latest Press Release:

“Making plans to take our technology to market” -Provini

 Red Bank, N.J. — (October 30, 2013) — An independent study has concluded that Natcore Technology’s (NXT.V; NTCXF.PK; 8NT) black silicon technology could reduce silicon solar cell production costs by up to 23.5%.

The savings derive from a streamlining of the production process whereby a silicon wafer is processed into a black silicon solar cell.

To make solar cells, manufacturers typically acquire silicon wafers from an outside source. Since these wafers are cut from a large ingot, they usually have saw damage, which must be removed. To make a conventional solar cell, manufacturers must first remove the saw damage, then texturize the wafer surface, and then apply an antireflective coating.

To make a black silicon cell using Natcore’s proprietary process, manufacturers would be able to replace the texture etch with a black silicon etch which in itself would create a highly effective antireflective coating.

Thus the most expensive part of the solar cell process – the equipment and material costs associated with high-temperature chemical vapor deposition of a silicon nitride antireflective coating – is completely eliminated.

Natcore asked analysts at the country’s leading black silicon research facility to quantify the cost saving to be realized from omitting these steps. Using a “bottom up” manufacturing cost estimating methodology, the analysts calculate the production cost of a conventional silicon solar cell to be 17¢ per watt. In comparison, the study projected that cells made using Natcore’s black silicon process would cost about 13¢ per watt.

The resulting savings of 3¢/watt – 4¢/watt represent a production cost reduction of up to 23.5%. “When solar companies are scrambling to save fractions of a cent, a saving of 3¢ – 4¢ per watt is momentous,” says Dr. Dennis Flood, Natcore’s co-founder and Chief Technology Officer.

In addition to the dramatic cost reduction, Natcore’s test, which was conducted using monocrystalline silicon, had an important environmental benefit: it eliminated the need for silane, a highly toxic gas that combusts upon exposure to air. Natcore may plan a similar test using polycrystalline silicon at a later date.

“We knew there would be a cost saving,” says Chuck Provini, Natcore’s president and CEO. “We were surprised that it was so large. In fact, production-cost savings of this magnitude will likely overshadow any power gains of black silicon and will make Natcore’s technology a must-have for the world’s solar cell manufacturers.

“To put it into perspective,” he notes, “a recent article by Shyam Mehta, senior solar analyst of GTM Research (‘Technology not materials to drive down Chinese solar costs,’ August 2013), predicts that Chinese manufacturers will be able to cut prices by only one cent in the next year or so. We could quadruple those savings in one fell swoop. We feel so optimistic about this development that we’ve begun making plans to take our technology to market.”

“The full cost of a solar cell is the sum of two parts: the cost of the silicon wafer and the cost of the processing steps required to turn the wafer into a working solar cell,” says Flood. “Cell manufacturers have no control over the cost of the silicon wafers they buy. As a result they are always looking for ways to control their production costs, but with a very important caveat:  cost cutting must not lower cell performance in any way.  Natcore’s black silicon processing technology results in solar cells that meet or exceed the industry’s requirement and at the same time provide a spectacular reduction in finished cell cost. Natcore’s technology can easily be retrofitted into existing solar cell production lines and can just as easily be incorporated into a new line. Black silicon seems poised to become the industry’s standard approach.”

About these ads

One response to “Natcore’s Latest PR- Black Silicon to Slash Solar Cell Production Costs by 23.5%

  1. Burton Noren November 24, 2013 at 11:53 am

    Great site, continue the good work!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 51 other followers

%d bloggers like this: